HPE Smart Array E208i-a SR Gen10 firmware update

Запись создана 24 октября, 2024

No drives were found in this system.You may need to reboot

You can obtain an rpm package here: https://downloads.linux.hpe.com/SDR/repo/spp-gen10/redhat/8/x86_64/current/

If you use RedHat based distro just install the rpm, otherwise extract it:

rpm2cpio firmware-smartarray-f7c07bdbbd-4.11-1.1.x86_64.rpm | cpio -idmv

and run an update process:

./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-4.11-1.1/setup
Supplemental Update / Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 (4.11), searching...
1) HPE Smart Array E208i-a SR Gen10 in Slot 0 (3.53)
Select which devices to flash [#,#-#,(A)ll,(N)one]> A
Flashing HPE Smart Array E208i-a SR Gen10 in Slot 0 [ 3.53 -> 4.11 ]
Deferred flashes will be performed on next system reboot
============ Summary ============
Smart Component Finished
 
Summary Messages
================
Reboot needed to activate 1 new FW image
 
Exit Status: 1
Deferred flashes will be performed on next system reboot
A reboot is required to complete update.

update firmware to 7.11 for correct work with iLo

Схожие темы

» Запись из раздела Linux | Комментировать

Комментарии





Ответить